I have a feeling my 3/8" drive socket set may not quite be big enough
1/2" drive may be pushing it too?
Lazy Grange Bay 3...a new start
- Thread starter mike
- Start date
1/2" drive may be pushing it too?
True, but I strongly suspect Mike has a big enough hammer,I have a feeling my 3/8" drive socket set may not quite be big enough
I've got a 1/4 inch set for the fiddly bitsI have a feeling my 3/8" drive socket set may not quite be big enough
Started light engine for a hour to bed it in.. then added the puddings ...
Rethink it was 19' but it kept pulling the wagons off..draw string effect on the bends... so 18 runs fine, on my line with r1s
Bach to the futureI don't think we wish to know about the G string effect
No, Bach in a minuetSo Mike has fitted a flux capacitor power buffer then?
Well temperedSo Mike has fitted a flux capacitor power buffer then?
A day of 2 shelves ...
Adding extra shelf space so I can then fill it with more lgb...
On the plus side it enabled me to move some stock around and alow me to get the garret into a display case...
The motor block from evilbay arived so I swapped out the knackard one from the Snow plow and fitted a new one...bargin at £50.
Adding extra shelf space so I can then fill it with more lgb...
On the plus side it enabled me to move some stock around and alow me to get the garret into a display case...
The motor block from evilbay arived so I swapped out the knackard one from the Snow plow and fitted a new one...bargin at £50.
Cheers Paul..
Bits turned up from model Land ...posted same day I complained about them not arriving..
Fitted bits..need 5 more M2 hex head bolts ...but...
Bits turned up from model Land ...posted same day I complained about them not arriving..
Fitted bits..need 5 more M2 hex head bolts ...but...
