A year or so ago I purchased the following locomotive:
The loco came factory dcc-fitted and now it's time to install a Massoth sound decoder. Muns has very kindly provided me with a LGB Service Sheet (much better than the Marklin Service Sheet that came with the loco) which confirms that the body needs to come off in order to fit the decoder and speaker.
Looking at the underside of the loco there are 8 visible screws which I have already removed but these do not appear to release the body from the chassis.
Before I start removing some of the other smaller screws (under the steps etc.) wonder if there is anybody out there who has taken one of these locos apart and can tell me how to do this.
Any help would be very much appreciated. Many thanks.
The loco came factory dcc-fitted and now it's time to install a Massoth sound decoder. Muns has very kindly provided me with a LGB Service Sheet (much better than the Marklin Service Sheet that came with the loco) which confirms that the body needs to come off in order to fit the decoder and speaker.
Looking at the underside of the loco there are 8 visible screws which I have already removed but these do not appear to release the body from the chassis.
Before I start removing some of the other smaller screws (under the steps etc.) wonder if there is anybody out there who has taken one of these locos apart and can tell me how to do this.
Any help would be very much appreciated. Many thanks.
